Overview

Quantum JPYX indicator for TradeStation Securities
Quantum JPYX indicator for TradeStation Global

If the US dollar is the primary currency to consider in any analysis of the forex market, the secondary one is the Japanese yen, and yet there are almost no indices which track this in a similar way. But once again, we have the answer and have therefore developed the JPYX index for the MT5 platform. This is based on the FXCM/Dow Jones index, and takes four major currencies, with an equal weighting to deliver the JPYX index as follows:

  • Australian dollar (AUD) – 25%
  • New Zealand dollar (NZD) – 25%
  • Euro (EUR) – 25%
  • US dollar (USD) – 25%

Once again, the index is based on a notional 10,000 mini lot contract size. It is our belief that this simple index provides a ‘real world’ view of strength and weakness in the Japanese yen which is equally important in terms of risk analysis. Whilst the US dollar has increasingly been adopted to fund the carry trade, the Japanese yen remains the key currency in this respect, and with flows into and out off risk assets remaining pivotal for the currency, having an index to track it’s performance against other key currencies is crucial.

Like the QuantumUSDX indicator, the Quantum JPYX indicator can be used in one of three ways:

  • First, as an inverse indicator to a major currency pair, helping you get in, stay in and get out
  • Second, as a confirming indicator for the Quantum Currency Strength indicator, providing a perspective against other currencies
  • Finally, as the ultimate barometer of risk

Whichever approach you adopt, you will no longer have to leave your TradeStation platform for a view of the Japanese yen! In addition, the indicator is also supplied with two moving averages already applied, the 8 SMA and the 14 SMA to help provide you with further insights into market direction.

Using the indicator in TradeStation Securities

Applying the indicator to a Chart Analysis window

From the Apps menu of your TradeStation platform, please open a Chart Analysis window.

From the Chart Analysis window’s toolbar, please click Studies > Add Study…

From the Add Study window, please choose Indicator at the left hand side of the interface then at the right, scroll down and select Quantum JPYX. Click OK to apply the indicator to the chart.

IMPORTANT: If this is your first time to run Quantum Trading indicators, the indicator will not work until you input your email address in its settings. To do this, please go back to your Chart Analysis window and click Studies > Edit Studies…

Select the indicator from the list then turn it On by clicking the Status button at the right hand side of the window. Click Customize… or double-click the Quantum JPYX to open the Customize Indicator window. In the Inputs section, find the MyQuantumTradingEmail input and enter here the email address you used at the Quantum Trading Shop to activate the indicator. PLEASE MAKE SURE TO ENCLOSE THE EMAIL ADDRESS IN DOUBLE QUOTATION MARKS. (example: “myemailaddress@gmail.com”)

Click OK (and Close) to save and go back to your chart. Please note that you need to do this only once which means you do not need to input your email address again when running Quantum Trading indicators next time.

Customizing the indicator in Chart Analysis

Inputs

  • MyQuantumTradingEmail – When running the indicator for the first time in your TradeStation trading account, you need to enter the email address you used to purchase the indicator in the Quantum Trading Shop as part of its verification process. You need to do this only once as the indicators “remember” your email address by storing it in the local drive. Please make sure that you enter your email address correctly and exactly without any extra spaces before and after it. If you made an error, simply fill this input again to update it. This is a string input which requires you to enclose your email address in double quotation marks (“”).
  • LookBack – The Quantum JPYX processes data from different sources unlike most indicators and this input helps improve load times by limiting the number of bars it calculates. You can increase this input to lengthen the period of the index calculated.
  • MA1Period – This is the length of the first Simple Moving Average included in the indicator with a default setting of 7.
  • MA2Period – This is the length of the second Simple Moving Average included in the indicator with a default setting of 14.
  • LineChartMode – The Quantum JPYX indicator attempts to generate its own candlestick chart by default but if this field is set to true, it will use a line chart to display the index.
  • BullishCandleColor – This setting allows you to change the color of the bullish candlesticks. As a string input, you need to enclose the name color in double quotation marks (“”). Named colors are the only accepted values in these inputs which are all listed in the following link – http://help.tradestation.com/09_01/tsdevhelp/Subsystems/elobject/class_win/color_class.htm. The color of a line reverts to the default named color if the input’s value is invalid.
  • BearishCandleColor – This setting allows you to change the color of the bearish candlesticks. As a string input, you need to enclose the name color in double quotation marks (“”). Named colors are the only accepted values in these inputs which are all listed in the following link – http://help.tradestation.com/09_01/tsdevhelp/Subsystems/elobject/class_win/color_class.htm. The color of a line reverts to the default named color if the input’s value is invalid.

General

You can modify the name, short name, notes, maximum number of bars the indicator will reference, and more. We do not recommend changing any of the settings in this section but you can learn more about the different options in the General tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_general.htm

Alerts

The Quantum JPYX indicator does not trigger any alerts.

You can learn more about the different options in the Alerts tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_alerts.htm

Style

The indicator uses 3 plots which you can customize the style in this section: Moving Average 1, Moving Average 2 and JPYX. The JPYX plot is displayed only when the indicator is in Line Chart Mode.

You can learn more about the different options in the Style tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_style.htm

Color

The indicator uses 3 plots which you can change the color in this section: Moving Average 1, Moving Average 2 and JPYX. The JPYX plot is displayed only when the indicator is in Line Chart Mode. To change the color of the candlesticks please use the BullishCandleColor and BearishCandleColor variables found in the indicator Inputs.

You can learn more about the different options in the Color tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_color.htm

Scaling

The Scaling tab is used to modify the scaling settings for the y-axis of the indicator in the active Chart Analysis window. We do not recommend changing any of the settings in this section but you can learn more about the different options in the Scaling tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_scaling.htm

Advanced

The Advanced tab allows you to set advanced preferences for the indicator. We do not recommend changing any of the settings in this section but you can learn more about the different options in the Advanced tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/10_00/eng/tradestationhelp/study/customize_study_advanced.htm

Making adjustments to the user interface in Chart Analysis

Expanding the Indicator’s Screen Size

Follow the steps below to expand the Quantum JPYX’s screen size in the chart.

  • Hover your mouse pointer over the space between the Quantum JPYX and the chart above it until the mouse cursor changes into a double headed arrow
  • HOLD down the left click on your mouse, and drag the mouse to the top until all currency buttons are visible
  • Hover your mouse over the right hand edge of the chart until a double headed arrow appears
  • HOLD down the left click on your mouse, and drag the right hand edge of the chart across to the left and release when done
  • Click on the chart to make it the active window
  • Click on the Increase Spacing – Up Arrow icon below, to expand your indicator to full size. The Increase Spacing – Up Arrow button is shown below when you hover over the bottom portion of the chart window.

Removing the indicator from the Chart Analysis window

From the Chart Analysis window’s toolbar, please click Studies > Edit Studies…

In the Studies tab, select Quantum JPYX and click Remove then click Close.

RadarScreen

The Quantum JPYX is not built for the RadarScreen app.

Using the indicator in TradeStation Global

Applying the indicator to a Chart Analysis window

From the Apps menu of your TradeStation platform, please open a Chart Analysis window.

From the menu bar, click Insert > Indicator… > Indicator tab then scroll down at the list and select the Quantum JPYX and click OK to apply the indicator in the chart.

IMPORTANT: If this is your first time to run Quantum Trading indicators, the indicator will not work until you input your email address in its settings. To do this, please go back to your Chart Analysis window then in the menu bar, click Format > Analysis Techniques…

Select the indicator from the list then turn it On by clicking the Status button at the right hand side of the window. Click Format… or double-click the Quantum JPYX to open the Format Indicator window. In the Inputs section, find the MyQuantumTradingEmail input and enter here the email address you used at the Quantum Trading Shop to activate the indicator. PLEASE MAKE SURE TO ENCLOSE THE EMAIL ADDRESS IN DOUBLE QUOTATION MARKS. (example: “myemailaddress@gmail.com”)

Click OK (and Close) to save and go back to your chart. Please note that you need to do this only once which means you do not need to input your email address again when running Quantum Trading indicators next time.

Customizing the indicator in Chart Analysis

Inputs

  • MyQuantumTradingEmail – When running the indicator for the first time in your TradeStation trading account, you need to enter the email address you used to purchase the indicator in the Quantum Trading Shop as part of its verification process. You need to do this only once as the indicators “remember” your email address by storing it in the local drive. Please make sure that you enter your email address correctly and exactly without any extra spaces before and after it. If you made an error, simply fill this input again to update it. This is a string input which requires you to enclose your email address in double quotation marks (“”).
  • LookBack – The Quantum JPYX processes data from different sources unlike most indicators and this input helps improve load times by limiting the number of bars it calculates. You can increase this input to lengthen the period of the index calculated.
  • MA1Period – This is the length of the first Simple Moving Average included in the indicator with a default setting of 7.
  • MA2Period – This is the length of the second Simple Moving Average included in the indicator with a default setting of 14.
  • LineChartMode – The Quantum JPYX indicator attempts to generate its own candlestick chart by default but if this field is set to true, it will use a line chart to display the index.
  • BullishCandleColor – This setting allows you to change the color of the bullish candlesticks. As a string input, you need to enclose the name color in double quotation marks (“”). Named colors are the only accepted values in these inputs which are all listed in the following link – http://help.tradestation.com/09_01/tsdevhelp/Subsystems/elobject/class_win/color_class.htm. The color of a line reverts to the default named color if the input’s value is invalid.
  • BearishCandleColor – This setting allows you to change the color of the bearish candlesticks. As a string input, you need to enclose the name color in double quotation marks (“”). Named colors are the only accepted values in these inputs which are all listed in the following link – http://help.tradestation.com/09_01/tsdevhelp/Subsystems/elobject/class_win/color_class.htm. The color of a line reverts to the default named color if the input’s value is invalid.

General

You can modify the name, short name, notes, maximum number of bars the indicator will reference, and more. We do not recommend changing any of the settings in this section but you can learn more about the different options in the General tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_general.htm

Alerts

The Quantum JPYX indicator does not trigger any alerts.

You can learn more about the different options in the Alerts tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_alerts.htm

Style

The indicator uses 3 plots which you can customize the style in this section: Moving Average 1, Moving Average 2 and JPYX. The JPYX plot is displayed only when the indicator is in Line Chart Mode.

You can learn more about the different options in the Style tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_style.htm

Color

The indicator uses 3 plots which you can change the color in this section: Moving Average 1, Moving Average 2 and JPYX. The JPYX plot is displayed only when the indicator is in Line Chart Mode. To change the color of the candlesticks please use the BullishCandleColor and BearishCandleColor variables found in the indicator Inputs.

You can learn more about the different options in the Color tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_color.htm

Scaling

he Scaling tab is used to modify the scaling settings for the y-axis of the indicator in the active Chart Analysis window. We do not recommend changing any of the settings in this section but you can learn more about the different options in the Scaling tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_scaling.htm

Advanced

The Advanced tab allows you to set advanced preferences for the indicator. We do not recommend changing any of the settings in this section but you can learn more about the different options in the Advanced tab in TradeStation’s help guide at the link below.

http://help.tradestation.com/09_01/tradestationhelp/el_properties/format_analysis_technique_advanced.htm

Expanding the Indicator’s Screen Size

Follow the steps below to expand the Quantum JPYX’s screen size in the chart.

  • Hover your mouse pointer over the space between the Quantum JPYX and the chart above it until the mouse cursor changes into a double headed arrow
  • HOLD down the left click on your mouse, and drag the mouse to the top until all currency buttons are visible
  • Hover your mouse over the right hand edge of the chart until a double headed arrow appears
  • HOLD down the left click on your mouse, and drag the right hand edge of the chart across to the left and release when done
  • Click on the chart to make it the active window
  • Click on the Increase Bar Spacing icon in the toolbar, to expand your indicator to full size.

Removing the indicator from the Chart Analysis window

From the menu bar of your TradeStation platform, click Format > Analysis Techniques…

In the Analysis Techniques tab, select Quantum JPYX and click Remove then click Close.

RadarScreen

The Quantum JPYX is not built for the RadarScreen app.